CNCzone Network: CNCzone  ::  3Dstuffzone  ::  RFQwork  


Results 1 to 2 of 2

Thread: Welding 4140 tube to 4140 block

  1. #1
    Join Date
    Mar 2012
    Posts
    1

    Default Welding 4140 tube to 4140 block

    Hello, 1st post, we are making a major effort to upgrade a product prototype to production.

    Welding Supplies and questions

    Trying to improve the Strength and looks of our welds
    Parts have been 4140 tube and 1018 block
    Now they are both 4140 Annealed
    Have been running 180 AMPs to weld fast and small

    Equipment on hand
    Miller Synchowave 200 Welder
    Negative electrode
    Aragon Gas
    I have 1/16”, 3/32” and 1/8” collets; 3/8”, 7/16” and ½” gas cups
    I have been using the 3/32” 2% Thoriated (EWTh-2) Tungsten with a sharp point
    Rod that I have on hand is RG45 1/16” and 1/8”
    I use a dedicated 6” grinder for tungsten grinding with an Aluminum Oxide wheel (2) coarse and medium grit

    I can pre-heat to 400Ί but I don’t want to heat to 1200Ί afterwards, I don’t want the surface oxidation that results.
    I have been burying the welded part in sand to cool slowly as soon as I finish the weld.

    Weld needs to be as small as possible but strong


    What rod?
    What Tungsten?
    Amp Range?
    What grinding wheel

    Thank you
    Lowell

  2. #2
    Join Date
    Oct 2013
    Posts
    2

    Default

    4140 tube belongs to alloy tube, so for the alloy tube welding, normally widely used the electro welding, jus the wall thickness is less than 4 mm and can use the gas welding.
    pipe welding (erw steel pipe)

Similar Threads

  1. Magnets to hold tube when Tig welding
    By Groovy2 in forum MIG, TIG, Stick, And Oxy/Fuel Welding
    Replies: 10
    Last Post: 02-14-2014, 03:13 AM
  2. Welding 4130 to 4140
    By minister in forum MIG, TIG, Stick, And Oxy/Fuel Welding
    Replies: 0
    Last Post: 12-14-2011, 02:08 PM
  3. New kid on the block.....Thanks , Hello!
    By turnNburn1x in forum Introduce yourself
    Replies: 1
    Last Post: 11-23-2009, 05:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •